When you receive your Superbox S3, there are a few steps that you can program your remote control and pair with your TV.

Step 1: Press the "OK" and synchronously for 8 seconds until LED flashes to enter pairing state.

Tip: The remote control should be paired as the above two steps, and the pairing process takes about 15s. If pairing is failed:

1. please check if the remote control is too far away from the TV box;

2. or check if there is a problem with the battery or the remote control itself;

3. or please go to the "Bluetooth" of the System Settings to select RC-100 for pairing.

Step 2: Press the "OK" key.